Tripods are simply placed underneath conveyor section cross brace (as shown in detail in 2nd image above).

Need more than just Light Duty Tripod Supports?

There are many more conveyor systems that are available for any application you might have.  Check out our shop to see what other conveyors we have available to order online, or contact us so we can help create a custom solution for your business.

Also check out the manufacturer’s general product catalog for all the conveyor types and conveyor options that can be purchased through us.  Custom configurations and lengths are also available.

The post Tripod Supports appeared first on Speedrack West.

There is a wide range of specifications for the conveyor wheels. For instance, you can filter them by manufacturers, types, load capacity, diameter, hub materials, tread with, bore diameter, operational temperature, and applications.

Why should you know more about the conveyor wheels? Because an uneven load can cause wear on the wheel and, as a result, even cause the roller to jam. The lower the coefficient of friction of a conveyor wheel, the less likely it is to deform, and there is no need for frequent replacement of damaged wheels. So, the wheel material is significant.
There are some materials such as aluminum, fiberglass, plastic, rubber, stainless steel, and just steel. Their steel wheels are stronger than the aluminum wheels. Aluminum wheels are lightweight and corrosion-resistant. Stainless steel wheels have more corrosion resistance than steel wheels and greater strength than aluminum wheels. Polycarbonate wheels have high capacity and good impact resistance. Fiberglass wheels are stronger than nylon and can withstand harsh environments and wash-downs.

Skate wheels specifications

Skate wheel rollers are used in different types of conveyor systems.
Typically, they can withstand thousands of revolutions under full load. The material of skate conveyor wheels is zinc-plated steel, and the protection is a labyrinth shield, which means they do not require extra lubrication throughout their entire service life.
Replacement skate wheels should be replaced to keep the equipment operational. Gravity conveyor wheels are best suited for light-duty applications. The key criteria are that the load bottom surface is flat, rigid, and smooth (such as cartons, totes, and cases). Soft-bottom packages are not recommended since wheels may indent soft-bottom containers, thus curtailing product movement.
Also, consideration must be given to the construction of the bottom surface of the product container. A wooden crate, for example, may hang on individual wheels and not start from its stopped position. It is important to note that the wheel conveyor should have a minimum of 5 wheels under the smallest box size and a minimum of 3 axles under it at all times.

So, if you need advice on how to assess your requirements properly, give us a call. We provide the additional assessment needed for your cases.

The post Conveyor Skate Wheels appeared first on Speedrack West.

Need more than just Medium Duty Conveyor Supports?

There are many more conveyor systems that are available for any application you might have.  Check out our shop to see what other conveyors we have available to order online, or contact us so we can help create a custom solution for your business.

Also check out the general product catalog for all the conveyor types and conveyor options that can be purchased through us.  Custom configurations and lengths are also available.

The post Conveyor Supports appeared first on Speedrack West.

Ball Transfer units make easy work of shifting, and rotating loads. You can see them in the conveyor systems and other equipment, such as feed tables for sheet-metal working machines, fixtures for press brakes, transfer ball tables, turntables and switches for sorting and distribution systems, baggage sorting systems at airports, and even lifting platforms.

Specifications

Ball Transfer Units have a steel housing incorporating a hardened ball cup. Ball Transfers precise rolling and full load-bearing capability are ensured in any mounting orientation. They require little maintenance, and almost every type is protected against dirt by an oil-soaked felt seal.

Ball Assemblies are 1″ dia. steel ball x 1-13/16″ overall housing diameter. The mounting bolt is 1/4″-20.

Replacement ball transfers have a 50 lb capacity per ball (maximum unit load not to exceed the capacity of 4 balls – 200 lbs). Determine ball spacing by dividing minimum package dimensions by 2.5 if you have goods with a uniform, smooth undersurface, such as boxes and cases. Center-to-center ball spacing results, with a minimum of 9 ball casters required to support each package.

Ball Transfers with steel load have up to 212°F. Use a high-temperature lubricant and observe the manufacturer’s instructions.

Please note that ball transfer units must not be used other than for their intended purpose. Installation or use of inappropriate products can result in uncontrolled operating conditions that can cause personal injury and/or property damage.

If you need more information, please contact us.

The post Ball Transfer - Single Unit appeared first on Speedrack West.