We don’t have a physical presence in Bend, OR; we’re located in North Plains, OR, 97133. We are always working to improve our freight costs, shipping points and services available in your area.
Bend, OR and the surrounding area
Warehouse Pallet Racks in Bend, OR
We offer pallet racking kits as well as sell pallet rack beams, uprights, axles, wire decks and other equipment sold separately to fit your material handling equipment needs.
Shop Our Products
Discover
300+
products
Requirements and Regulations Specific to Racking in Bend, OR
High-Piled Combustible Storage
A detailed plan must be submitted to the local fire department for review, including the layout of the storage area, fire protection systems, and any other pertinent safety features. The fire department will assess these plans to ensure they meet the required fire code standards.
For high-piled storage, the type of fire suppression system used is critical. In Bend, different systems like Early Suppression Fast Response (ESFR) or Control Mode Specific Application (CMSA) sprinklers might be required, depending on the specific arrangement and hazard classification of the storage.
If the storage or warehouse is being modified or repurposed to high-piled combustible storage, a reevaluation of the fire protection systems is required. Failure to comply with these regulations could result in penalties or the requirement to make costly modifications after an inspection.
For more detailed and specific requirements, you should refer to the official guidelines provided by the City of Bend or consult with a fire protection engineer familiar with NFPA 13 and the OFC.
Are Racking Permits Required in Bend, OR?
Key Requirements
-
A building permit is typically required for racking systems, especially when the racks exceed a certain height or involve significant structural modifications to the building. The permit process involves submitting detailed plans, including load calculations and seismic design considerations.
-
Given that Bend is in a seismically active area, racks must be designed and installed according to seismic standards. This includes proper anchorage to the floor and possibly the use of seismic bracing. The design must comply with the Oregon Structural Specialty Code, which is based on the International Building Code (IBC).
-
If the racking system is used for high-piled combustible storage, additional fire safety measures, such as sprinkler systems, may be required. These systems must meet the standards set by the National Fire Protection Association (NFPA) and the Oregon Fire Code.
-
After installation, the racking system will typically undergo an inspection by local building officials to ensure it meets all the structural and safety requirements.
We are Bend’s largest pallet rack and material handling distributor!
What Pallet Rack type is right for you?
In Bend, OR, we can offer various types of pallet racks that are commonly used in warehouses and storage facilities, depending on the specific needs and requirements of the business. Here are some types of pallet racks that are widely used and compliant with local regulations:
Selective Pallet Racks
The most common type of pallet racking system. It provides direct access to each pallet, making it suitable for warehouses with a wide variety of products.
Advantages
Flexibility, ease of access, and compatibility with most types of forklifts.
Compliance
Must meet structural and seismic requirements as outlined in the local building codes and ASCE 7 standards.
Advantages
Flexibility, ease of access, and compatibility with most types of forklifts.
Compliance
Must meet structural and seismic requirements as outlined in the local building codes and ASCE 7 standards.
Drive-In/Drive-Through Racks
Designed for high-density storage, allowing forklifts to drive directly into the rack to place or retrieve pallets. Drive-In racks have one entry and exit point, while Drive-Through racks have entry and exit points on both sides.
Advantages
Maximizes storage space by reducing aisle space.
Compliance
Requires careful design and anchorage to meet safety standards, especially in seismic zones.
Advantages
Maximizes storage space by reducing aisle space.
Compliance
Requires careful design and anchorage to meet safety standards, especially in seismic zones.
Push-Back Racks
A high-density storage system where pallets are loaded from the front and pushed back on inclined rails. When a pallet is removed, the next pallet automatically moves forward.
Advantages
Increases storage density while providing better access to products compared to drive-in racks.
Compliance
Needs to adhere to local structural requirements and periodic inspections for safety.
Advantages
Increases storage density while providing better access to products compared to drive-in racks.
Compliance
Needs to adhere to local structural requirements and periodic inspections for safety.
Pallet Flow Racks
Utilizes gravity flow lanes to move pallets from the loading side to the picking side. Ideal for first-in, first-out (FIFO) inventory management.
Advantages
Efficient for warehouses with high turnover rates and expiration-sensitive products.
Compliance
Requires detailed structural analysis and compliance with seismic bracing standards.
Advantages
Efficient for warehouses with high turnover rates and expiration-sensitive products.
Compliance
Requires detailed structural analysis and compliance with seismic bracing standards.
Designing Your Pallet Rack
Using our custom pallet rack system builder will automatically calculate the correct length of each row of racking. You can also have a copy of your designed layout instantly emailed to you.
Create Layout:
- Append rows
- Append Add On bays to each row
Select Rack Options:
- Pallet Racks: Frame, Beam, Wire Decking, Safety Accessories
- Cantilver Racks: Uprights, Bracing, Arms
- Shelving: Height, Width, Depth, Wire Decking, Safety Accessories
Create Order:
- Add selected to Cart in one click
- Checkout your order
Try Pallet Rack builder
About Pallet Rack Builder
Starter bays consist of two frames plus the beams, and can stand alone. Add-on bays only have one frame plus the beams, and they are designed to connect to an adjacent frame.
Each row must begin with a starter bay, and then use add-on bays to increase the length of the row. There is no limit to the number of add-on bays you can connect together in a row.
For example, a row with two bays of 8ft beams would consist of one starter bay and one add-on bay, which would have three uprights. At 3” each, the three uprights would take up 9” of space. Add this to the two 8ft beams, for a total length of 16’ 9”.
What Are the Shipping Terms?
Most of our industrial racking production will be delivered to Bend, OR, in a day or two. We have multiple shipping locations, but most of them are located not far from Bend, OR. Our main office and production site are located in North Plains, OR – so the delivery will be really quick to Bend, OR. You can always have a free local pick-up at 97133.
I am planning to establish a new warehouse, can you consult?
Definitely, our team of specialists will be glad to assist you with your new warehouse in Bend, WA. We can create a walkthrough process according to local Bend, WA laws and compliances. We may also help with all measures, calculations, production, and installation of your future warehouse.
Key Notions
Pallet racks are known throughout the industry by many names. Below are some of the more common terms that are used interchangeably for pallet racking.
- Industrial shelving
- Industrial pallet racks
- Stacking Rack
- Warehouse shelving
- Industrial racking systems
- Load-bearing Rack
- Warehouse racking systems
- Pallet rack systems
- Bulk Storage Rack
- Warehouse racks
- Pallet racking storage
- Heavy-Duty Rack
- Pallet racking
- Pallet racking uprights and beams
- Pallet Shelving
- Warehouse racking
- Industrial Rack
- Logistics Rack
- Warehouse pallet shelving rack
- Racking System
- Palletized Storage System
- Storage racking
- Shelving Unit
- Freight Storage Rack
- Warehouse storage racks
- Material Handling Rack
Robert Baumgartner says: “Despite picking up this project in the middle of its lifecycle, the transition was flawless thanks to the team’s stellar communication. They exceeded our expectations by delivering the installation earlier than anticipated and hitting every technical requirement. From the sales team’s quick answers to their willingness to make adjustments, the experience was top-tier.”
Consolidated Supply says: “We’re very happy to be your regular client, and it’s always so easy to work with your team”
Lumber Company says: “Working with Speedrack West team has been a real pleasure. They made the whole process smooth and straightforward, and we’re 100% planning to come back again—which we actually just did recently.”
Derek Patterson says: “I would suggest that there should be no hesitation…from placing an order to getting everything delivered in such a timely manner. I had racking within 7 days compared to 4 to 6 weeks elsewhere. The customer service level is fabulous.”
Levi Littrell says: “It’s a very expensive product no matter who you go with. Speedrack West will actually walk you through the steps and give you pricing options. Definitely, you do your research, but most likely you’re going to come back to Speedrack West.”
Gerald Allen says: “I do know that basically got called every day. How’s it going, is everything good? So the attention to detail and the concern for my happiness for lack of better terms was definitely a part of working with your company.”
James Roberts says: “It was vital for us to go with your company. With your guys’ company’s versatility to accommodate our needs from rack sizing to structural weight capacity.”
Need Warehouse Help in Bend? Let’s Talk.