We don’t have a physical presence in Medford, OR; we’re located in North Plains, OR, 97133. We are always working to improve our freight costs, shipping points and services available in your area.
Medford, OR and the surrounding area
Pallet Racking Systems in Medford, OR
We offer pallet racking kits as well as sell pallet rack beams, uprights, axles, wire decks and other equipment sold separately to fit your material handling equipment needs.
Shop Our Products
Discover
300+
products
Requirements and Regulations Specific to Racking in Medford, OR
High-Piled Combustible Storage
Key Requirements
-
A permit is required for high-piled storage if the storage height exceeds the threshold established by the local fire code. You must submit a detailed plan, including the type of materials stored, storage arrangement, and fire protection measures. The Medford Fire Department must approve these plans before storage can begin. The plans need to demonstrate compliance with the fire safety and structural requirements outlined in the Medford Fire Code, which aligns with the Oregon Fire Code (OFC) and International Fire Code (IFC).
-
Permit Requirement:
High-piled storage areas must be protected by an automatic sprinkler system designed to handle the specific type of materials stored. The sprinkler system must be capable of controlling a potential fire based on the storage height and material classification.
-
Application:
High-piled storage areas must be protected by an automatic sprinkler system designed to handle the specific type of materials stored. The sprinkler system must be capable of controlling a potential fire based on the storage height and material classification.
-
Adequate access for the fire department must be maintained around the storage area. This includes maintaining clear aisles and ensuring that no storage blocks fire exits or fire suppression equipment.
-
The arrangement of storage racks and piles must allow for the effective operation of fire suppression systems. For instance, the racks should not be too close to each other, and there must be sufficient clearance between the top of the storage and the ceiling to allow sprinkler systems to function effectively. The use of solid shelving is generally discouraged in favor of open shelving, which allows water from sprinkler systems to penetrate and reach lower levels of storage.
-
In addition to sprinkler systems, fire detection, and alarm systems are required to provide early warning in the event of a fire. These systems must be connected to a central monitoring system that can alert the fire department.
-
Proper signage indicating the classification of the storage area, maximum storage height, and fire safety instructions must be clearly posted. Aisles and access routes should be marked, and the maximum permissible height should be indicated on the racks.
-
High-piled storage areas must undergo regular inspections to ensure that all fire protection systems are operational and that the storage arrangement remains compliant with approved plans. Any changes to the storage configuration may require a new permit and inspection.
Structural Requirements for Storage Racks
In Medford, OR, the structural requirements for storage racks, including pallet racking systems, are designed to ensure safety, particularly in the context of seismic activity, which is a significant concern in the region. The primary structural requirements include:
Seismic Design Considerations
- Medford is in a seismically active area, so storage racks must be designed to withstand earthquake forces. The design should comply with the Oregon Structural Specialty Code (OSSC), which incorporates standards from the International Building Code (IBC).
- Racks must be anchored to the floor, and the design should account for potential seismic loads. This often involves using bracing systems and ensuring that the connections between racks are strong enough to resist movement during an earthquake.
Load Capacity and Stability
- The racks must be capable of safely supporting the loads they are intended to carry. This includes both the weight of the stored items and any dynamic loads that could occur, such as during loading and unloading.
- The design must prevent the racks from tipping over or collapsing, which requires careful consideration of the height-to-depth ratio, as well as the use of base plates and anchors.
Fire Safety and Egress
- The layout of the racks must not obstruct fire protection systems, such as sprinklers, and must allow for safe egress routes. The height and configuration of the racks should not impede fire suppression efforts.
- Fire safety codes require that storage racks be placed in a way that maintains sufficient clearance around fire suppression equipment and exit paths.
Inspections and Maintenance
- Regular inspections are required to ensure that the racks remain in compliance with structural requirements. Any damage or wear that could compromise the integrity of the racks must be addressed promptly.
- Proper maintenance practices, such as regular tightening of bolts and checking for rust or corrosion, are essential for the long-term stability of the racking system.
For detailed guidelines and to ensure compliance with all relevant codes, you should consult with a structural engineer familiar with local regulations and the seismic requirements in Oregon. The Medford Building Department can also provide specific information on the requirements and assist with the permitting process
We are Medford’s largest pallet rack and material handling distributor!
What Pallet Rack type is right for you?
In Medford, OR, we can offer various types of pallet racks that are commonly used in warehouses and storage facilities, depending on the specific needs and requirements of the business. Here are some types of pallet racks that are widely used and compliant with local regulations:
Selective Pallet Racks
The most common type of pallet racking system. It provides direct access to each pallet, making it suitable for warehouses with a wide variety of products.
Advantages
Flexibility, ease of access, and compatibility with most types of forklifts.
Compliance
Must meet structural and seismic requirements as outlined in the local building codes and ASCE 7 standards.
Advantages
Flexibility, ease of access, and compatibility with most types of forklifts.
Compliance
Must meet structural and seismic requirements as outlined in the local building codes and ASCE 7 standards.
Drive-In/Drive-Through Racks
Designed for high-density storage, allowing forklifts to drive directly into the rack to place or retrieve pallets. Drive-In racks have one entry and exit point, while Drive-Through racks have entry and exit points on both sides.
Advantages
Maximizes storage space by reducing aisle space.
Compliance
Requires careful design and anchorage to meet safety standards, especially in seismic zones.
Advantages
Maximizes storage space by reducing aisle space.
Compliance
Requires careful design and anchorage to meet safety standards, especially in seismic zones.
Push-Back Racks
A high-density storage system where pallets are loaded from the front and pushed back on inclined rails. When a pallet is removed, the next pallet automatically moves forward.
Advantages
Increases storage density while providing better access to products compared to drive-in racks.
Compliance
Needs to adhere to local structural requirements and periodic inspections for safety.
Advantages
Increases storage density while providing better access to products compared to drive-in racks.
Compliance
Needs to adhere to local structural requirements and periodic inspections for safety.
Pallet Flow Racks
Utilizes gravity flow lanes to move pallets from the loading side to the picking side. Ideal for first-in, first-out (FIFO) inventory management.
Advantages
Efficient for warehouses with high turnover rates and expiration-sensitive products.
Compliance
Requires detailed structural analysis and compliance with seismic bracing standards.
Advantages
Efficient for warehouses with high turnover rates and expiration-sensitive products.
Compliance
Requires detailed structural analysis and compliance with seismic bracing standards.
Industrial Pallet Rack Safety Considerations
Safety is a top priority here at Speedrack West. Train your employees on safe loading practices and maintaining clear aisles for forklift operations to prevent accidents and injuries. However there are few safety measures available.
If pallet rack safety is compromised, racks can collapse under excessive loads, leading to severe injuries, fatalities, and significant inventory loss. Items may fall from the racks, posing a danger to workers and potentially damaging goods. Impact damage from forklifts can weaken the structure, increasing the risk of failure.
Designing Your Pallet Rack
Using our custom pallet rack system builder will automatically calculate the correct length of each row of racking. You can also have a copy of your designed layout instantly emailed to you.
Create Layout:
- Append rows
- Append Add On bays to each row
Select Rack Options:
- Pallet Racks: Frame, Beam, Wire Decking, Safety Accessories
- Cantilver Racks: Uprights, Bracing, Arms
- Shelving: Height, Width, Depth, Wire Decking, Safety Accessories
Create Order:
- Add selected to Cart in one click
- Checkout your order
Try Pallet Rack builder
About Pallet Rack Builder
Starter bays consist of two frames plus the beams, and can stand alone. Add-on bays only have one frame plus the beams, and they are designed to connect to an adjacent frame.
Each row must begin with a starter bay, and then use add-on bays to increase the length of the row. There is no limit to the number of add-on bays you can connect together in a row.
For example, a row with two bays of 8ft beams would consist of one starter bay and one add-on bay, which would have three uprights. At 3” each, the three uprights would take up 9” of space. Add this to the two 8ft beams, for a total length of 16’ 9”.
What Are the Shipping Terms?
Most of our industrial racking production will be delivered to Medford, OR, in a day or two. We have multiple shipping locations, but most of them are located not far from Medford, OR. Our main office and production site are located in North Plains, OR, so the delivery will be really quick will be really quick to Medford, OR. You can always have a free 97133 pick-up.
I am planning to establish a new warehouse, can you consult?
Definitely, our team of specialists will be glad to assist you with your new warehouse in Medford, OR. We can create a walkthrough process according to local Medford, OR laws and compliances. We may also help with all measures, calculations, production, and installation of your future warehouse.
Key Notions
Pallet racks are known throughout the industry by many names. Below are some of the more common terms that are used interchangeably for pallet racking.
- Industrial shelving
- Industrial pallet racks
- Stacking Rack
- Warehouse shelving
- Industrial racking systems
- Load-bearing Rack
- Warehouse racking systems
- Pallet rack systems
- Bulk Storage Rack
- Warehouse racks
- Pallet racking storage
- Heavy-Duty Rack
- Pallet racking
- Pallet racking uprights and beams
- Pallet Shelving
- Warehouse racking
- Industrial Rack
- Logistics Rack
- Warehouse pallet shelving rack
- Racking System
- Palletized Storage System
- Storage racking
- Shelving Unit
- Freight Storage Rack
- Warehouse storage racks
- Material Handling Rack
Robert Baumgartner says: “Despite picking up this project in the middle of its lifecycle, the transition was flawless thanks to the team’s stellar communication. They exceeded our expectations by delivering the installation earlier than anticipated and hitting every technical requirement. From the sales team’s quick answers to their willingness to make adjustments, the experience was top-tier.”
Consolidated Supply says: “We’re very happy to be your regular client, and it’s always so easy to work with your team”
Lumber Company says: “Working with Speedrack West team has been a real pleasure. They made the whole process smooth and straightforward, and we’re 100% planning to come back again—which we actually just did recently.”
Derek Patterson says: “I would suggest that there should be no hesitation…from placing an order to getting everything delivered in such a timely manner. I had racking within 7 days compared to 4 to 6 weeks elsewhere. The customer service level is fabulous.”
Levi Littrell says: “It’s a very expensive product no matter who you go with. Speedrack West will actually walk you through the steps and give you pricing options. Definitely, you do your research, but most likely you’re going to come back to Speedrack West.”
Gerald Allen says: “I do know that basically got called every day. How’s it going, is everything good? So the attention to detail and the concern for my happiness for lack of better terms was definitely a part of working with your company.”
James Roberts says: “It was vital for us to go with your company. With your guys’ company’s versatility to accommodate our needs from rack sizing to structural weight capacity.”
Contact Us Today. We’re Ready to Help!